Apply with either hand or power application equipment as a residual treatment.
- Target pest
- insect pests
- Location
- Outdoor
Nothing here is label direction — the label is the law. These are notes from other applicators, moderated before they appear. Check the labeling accompanying the product and applicable state requirements.
Sign in through the portal or Create a free account to post. Comments are reviewed before they appear. Need a website for your pest-control business? See site plans.
LambdaStar UltraCap 9 7 is a residual treatment for insect pests, crawling pests, and termites. It is applied outdoors as a coarse spray using hand or power application equipment to create perimeter barrier treatments around foundations, windows, doors, and eaves, or as a spot and crack-and-crevice application on impervious surfaces like sidewalks and patios. It can also be applied to treated channels to kill worker or winged reproductive termites present at the time of treatment.
Apply with either hand or power application equipment as a residual treatment.
To kill workers or winged reproductive forms which may be present in treated channels at the time of treatment. Not intended as a substitute for soil treatment labeled termiticides or mechanical alteration to control subterranean termites, or fumigation for extensive infestation of drywood termites or other wood-infesting insects. Not recommended as sole protection against termites.
Premise Perimeter Barrier Treatments: Apply a continual band up to 10 ft. wide around the structure and upwards along the foundation to 3 ft. and around windows, doors, and roof overhangs. Apply as a coarse spray to thoroughly and uniformly wet the foundation and/or band area so that the insecticide will reach the soil or thatch level.
limited to spot and crack-and-crevice applcations, only.
| For pests | Amount | Per | Finished strength | Label notes |
|---|---|---|---|---|
| Perimeter Barrier Applications | 0.2 fl. oz. (6mL) | 1-5 gals. water | Area of Coverage (sq. ft.): 800-1600 sq. ft | |
| Perimeter Barrier Applications | 0.4 fl. oz. (12 mL) | 1-5 gals. water | Area of Coverage (sq. ft.): 800-1600 sq. ft. | |
| Perimeter Barrier Applications | 0.8 fl. oz. (24 mL) | 1-5 gals. water | Area of Coverage (sq. ft.): 800-1600 sq. ft. | |
| Perimeter Barrier Applications | 1 fl. oz. (30 mL) | 5 gals. water | Application Rate: 1,000 sq. ft. per 1 gal. of LambdaStar Solution | |
| Perimeter Barrier Applications | 2 fl. oz. (60 mL) | 5 gals. water | Application Rate: 1,000 sq. ft. per 1 gal. of LambdaStar Solution | |
| Perimeter Barrier Applications | 4 fl. oz. (120 mL) | 5 gals. water | Application Rate: 1,000 sq. ft. per 1 gal. of LambdaStar Solution | |
| Perimeter Barrier Applications | 1 fl. oz. (30 mL) | 10 gals. water | Application Rate: 1,000 sq. ft. per 2 gal. of LambdaStar Solution | |
| Perimeter Barrier Applications | 2 fl. oz. (60 mL) | 10 gals. water | Application Rate: 1,000 sq. ft. per 2 gal. of LambdaStar Solution | |
| Perimeter Barrier Applications | 4 fl. oz. (120 mL) | 10 gals. water | Application Rate: 1,000 sq. ft. per 2 gal. of LambdaStar Solution | |
| Perimeter Barrier Applications | 1 fl. oz. (30 mL) | 50 gals. water | Application Rate: 1,000 sq. ft. per 5 gal. of LambdaStar Solution | |
| Perimeter Barrier Applications | 2 fl. oz. (60 mL) | 50 gals. water | Application Rate: 1,000 sq. ft. per 5 gal. of LambdaStar Solution | |
| Perimeter Barrier Applications | 4 fl. oz. (120 mL) | 50 gals. water | Application Rate: 1,000 sq. ft. per 5 gal. of LambdaStar Solution | |
| Perimeter Barrier Applications | 4 oz. of concentrate | 50 gallons of water | 0.006% active in the tank dilution | Example Calculation: To apply the mid-rate of LambdaStar UltraCap 9.7% at a volume of 5 gal./1,000 sq. ft. |