Chemicalsenvironmental-science-u-s-llcpremise-2-insecticide

PREMISE 2 INSECTICIDE

ENVIRONMENTAL SCIENCE U.S., LLC · Imidacloprid 21.4% · EPA Reg 101563-66 · INSECTICIDE; MITICIDE Document last checked 2024-03-08

About this product

Active ingredient Imidacloprid 21.4%
Manufacturer ENVIRONMENTAL SCIENCE U.S., LLC
Category INSECTICIDE; MITICIDE

Full details for PREMISE 2 INSECTICIDE

EPA registration data Reg. 101563-66 — registry reference, signal word and status.

Applicator discussion

Nothing here is label direction — the label is the law. These are notes from other applicators, moderated before they appear. Check the labeling accompanying the product and applicable state requirements.

Add your experience

Sign in through the portal or Create a free account to post. Comments are reviewed before they appear. Need a website for your pest-control business? See site plans.

According to the label From the product label

These details were extracted from this product's label PDF. The label is the law. Confirm every rate, site, restriction and safety requirement against the label before mixing or applying. Check for a state supplemental label; a product may be restricted or prohibited in a state or site even when a rate appears below. · EPA registration data for Reg. 101563-66 →

PREMISE 2 is an insecticide used to control subterranean termites. It can be applied to outdoor soil or other fill substrates, as well as to areas such as concrete slabs-on-ground, basements, or gravel/coarse aggregate fill. Application involves treating soil at critical areas like foundation walls or covering specific surface areas with a liquid solution.

Pests covered (15)
subterranean termiteTERMITESDAMPWOOD TERMITESDRYWOOD TERMITESSUBTERRANEAN TERMITESCARPENTER ANTSCARPENTER BEEWHARFBORERBARK BEETLESAMBROSIA BEETLESPOWDERPOST BEETLESANOBIID BEETLESDEATHWATCH BEETLEOLD HOUSE BORERWOOD INFESTING INSECTS
Areas treatable (25)
soil or other fill substrateCONCRETE SLAB-ON-GROUND OR BASEMENTSCONCRETE SLAB-ON-GROUND OR BASEMENTS (gravel or coarse aggregate fill)CONCRETE SLAB-ON-GROUND OR BASEMENTS (critical areas)WOOD STRUCTURES (MASONRY JOINTS) (SOIL CONTACT NONFUMIGATION TREATMENT)EXISTING WOOD BUILDINGS OR PARTS OF BUILDINGS (SOIL CONTACT NONFUMIGATION TREATMENT)BUILDINGS (NONAGRICULTURAL) (PERIMETER) (SOIL TREATMENT)CARPORTS (WOOD)WOOD FENCES (SOIL CONTACT NONFUMIGATION TREATMENT)WOOD (SOIL CONTACT NONFUMIGATION TREATMENT)COMMERCIAL/INSTITUTIONAL/INDUSTRIAL BUILDINGS (WALL VOIDS)WATERWAY EDGES (RELATED SURFACES)ORNAMENTAL TREES (INJECTION TREATMENT)BASEMENTSDOMESTIC DWELLINGS (INDOOR)DOMESTIC DWELLINGS (INDOOR) (WALL VOIDS)WOOD PILINGS (SOIL CONTACT NONFUMIGATION TREATMENT)WOOD POLES/POSTS (SOIL CONTACT NONFUMIGATION TREATMENT)WOOD UTILITY POLES (SOIL CONTACT NONFUMIGATION TREATMENT)CONCRETE SLABS (SOIL CONTACT NONFUMIGATION TREATMENT)TERRESTRIAL STRUCTURES (SOIL CONTACT NONFUMIGATION TREATMENT)WOOD DECKS (SOIL CONTACT NONFUMIGATION TREATMENT)WOOD STRUCTURAL PARTS (SOIL CONTACT NONFUMIGATION TREATMENT)COMMERCIAL/INSTITUTIONAL/INDUSTRIAL BUILDINGS (INDOOR)HUMAN DRINK WATER SURFACES

How to treat each type of area 4

soil or other fill substrate

Target pest Location Rate Unit Dilution Label notes
subterranean termite Outdoor 4 gallons of solution per 10 linear feet 0.05% to 0.1% Generally a 0.05% dilution is used for typical control situations. Where severe or persistent infestations occur, a 0.1% dilution may be used. Where soil conditions will not accept application of 4 gallons of PREMISE 2 Insecticide per 10 linear feet, twice the PREMISE 2 Insecticide concentration may be applied in 2 gallons of solution per 10 linear feet.

CONCRETE SLAB-ON-GROUND OR BASEMENTS

Target pest Location Rate Unit Label notes
subterranean termite Outdoor 1 gallon of solution to accurately and uniformly cover 10 square feet Apply an overall treatment to the entire surface of soil or other substrate to be covered by the slab including areas to be under carports, porches, basement floor and entrance platforms.

CONCRETE SLAB-ON-GROUND OR BASEMENTS (gravel or coarse aggregate fill)

Target pest Location Rate Unit Label notes
subterranean termite Outdoor 1.5 gallons or sufficient volume of solution, to accurately and uniformly cover 10 square feet If fill under slab is gravel or other coarse aggregate

CONCRETE SLAB-ON-GROUND OR BASEMENTS (critical areas)

Target pest Location Rate Unit Label notes
subterranean termite Outdoor 4 gallons of solution per 10 linear feet apply 4 gallons of solution (see APPLICATION VOLUME) per 10 linear feet to provide a uniform treated zone in soil at critical areas such as along the inside of foundation walls

Mixing instructions 10

For pests Amount Per Finished strength Label notes
subterranean termite 8 mL 1 gallon water 0.05%
subterranean termite 16 mL 1 gallon water 0.1%
subterranean termite 16 mL 2 gallons water 0.05%
subterranean termite 32 mL 2 gallons water 0.1%
subterranean termite 40 mL 5 gallons water 0.05%
subterranean termite 80 mL 5 gallons water 0.1%
subterranean termite 80 mL 10 gallons water 0.05%
subterranean termite 160 mL 10 gallons water 0.1%
subterranean termite 0.3 1 fl oz/gal 0.05% PROPORTIONAL INJECTOR MIXING TABLE
subterranean termite 0.6 1 fl oz/gal 0.10% PROPORTIONAL INJECTOR MIXING TABLE

Timing & weather

Use restrictions 6